FXA50A6 High-Cycle Concrete VibratorFXA50A6 High Cycle Concrete Vibrator 2" head, 20' hose, 33' cord, 180 Hz High cycle vibrators are used with low slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load. Powered by a 2 amp

Description 594602101 HANDLE CPL

cleaner workspace

Description 586877801 WIRING HARNESS CONTACTOR

88" models [TS88]

Description 533783401 HYDR CYLINDER-BMS-220ADB

Crank raise / lower is standard quality

1 Phase model stands out for:

Current Draw: 6

The blade's innovative design also minimizes vibration

efficient energy for demanding

9 hp Current 15 Amp 12 Amp Frequency 50-60 Hz 50-60 Hz Grinding speed 200-500 rpm 300-750 rpm Grinding disc 3 x 6

and Professional Results