Smith Titanium 9-1/2" x 3/16" Brake RotorHyper Racing # 06 1423Ti This rotor does not fit Hyper 600cc Chassis. 9 1 2 O. D., 3 16" thick 6 holes on 5 1 4 centers Surface ground CNC machined All edges are radiused Weight = 1. 46 lb.

Hyper Racing # 081-055

it is actually pretty complicated and not real straight forward on what those different mounting points do to the car handling

Made to fit our X7 Jacob's ladder bearing carriers

Hyper Racing # 03-065B

For any and all bearings

x 1" x 5/16"-24 Threaded Boss (2)

For bearing carriers other than the Jacobs ladder one

Hyper Racing # 06-142

This bolt is used on the X6 chassis through the rear panhard sleeve to bolt the rear panhard bar in place and to mount the adjuster rod for the remote adjuster

(1) 7/16-20 x 2” HHCS with (1) 7/16-20 nylock half nut

your chassis must have the 3-hole Jacob's ladder tabs (T-561 (3)

Hyper Racing's exclusive Jacob's Jacker ® (patent pending) is a system that allows the remote adjustment of the Jacob Ladder's roll center while you are in the cockpit on the race track