5MP Raspberry Pi Camera Module Rev 1.3The high definition camera module is compatible with the Raspberry Pi model A and model B. Provides high sensitivity, low crosstalk and low noise image capture in an ultra small and lightweight design. The camera module connects to the Raspberry Pi board via the CSI connector designed specifically for interfacing with cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor. The 5MP

This 5 Way DIP SPST Switch is the simplest type of switch in which a single toggle either connects or disconnects a single terminal from other

Rated Voltage 250V AC Rated Current 3A Breaking Capacity 30A Mounting Through-hole Material Glass Endcaps Nickel-Plated Brass Orientation Axial Leads Leads Material Tin-plated Copper Terminal Type Ferrule Size 3

Operating Temperature Range: -40°C to +85°C

This is a Aluminum Heat Sink is 47 x 40 x 15 mm (L x W x H) and can be used for a variety of Applications

Gold for these 2K2 resistors

These are Carbon Film Resistor with a value of 51k ohm 1/4W and tolerance of ±5%

it would go up and down around 10% -90% with block and signal interference)

Max Forward Voltage

A small Red and Yellow Green bi-colour 5mm light-emitting diode with a common cathode that produces consistent light and consumes little power

0% Resistance(ohm) 200KΩ，±1

2A Pulsed Drain Current -27A Operating Temperature -55°C~150°C Package SOT23 Quantity 3000

Beginners and even experts can use this kit