Victron Energy MK3 to USB Interface (USB-A Version)This device can connect directly to a compatible inverter charger via the VE. Bus for easy configuration and firmware updates with VictronConnect or VEConfigure software. In particular, the Victron MultiPlus inverter chargers ship from the factory set to charge AGM Gel type batteries. Since most van electrical systems use lithium type batteries the charging settings need to be configured. Check out our post on how to program configure a Victron

The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise any performance

100% polyester with a moderate stiff finish

the cut edges lose their protective coating)

Shipping can vary depending on where you source all these parts but let's assume that it costs you $20 in shipping or gas driving to the hardware store

159" wheel base Promaster: 50-55 linear feet

Mercedes Sprinter Vans

Lengths: 10′ 6″

000 Ampere Interrupt Capacity (AIC)

it's going to "hang down" lower than this custom molded tank

The MultiPlus-II has all of the expected features of our versatile inverter/charger range

Standard Mounting Bracket

We recommend using an angle grinder with a cut-off wheel to remove it and then grind it flat so that there are not any rough/sharp edges that might cut into the tank plastic