6 Pin 2.54mm pitch Male and Female Relimate Connector 2510It's a 6 Pin 2. 54 Male and Female Relimate Connector . The 6 Pin RMC Relimate Cable Pitch 2. 54mm is ideal for use as a power connector, sensor connector, or any general purpose connection that needs to be protected from an incorrect connection or reverse polarity. The connector comes with a compatible male connector that can only be mated in one direction. The 2. 54mm pitch male connector can be easily soldered onto a standard prototype board.

It can be securely attached to any 5mm diameter shaft with two set screws

5sec stable-time

Low power standby mode

These devices have low on-resistance and optimum switching properties because of their strip layout and an improved vertical structure

24") Width 13

2 ohm 1W and tolerance of ±5%

5 V Steady-State Input Voltage -2 V - 0

These are Carbon Film Resistor with a value of 30k ohm 1/4W and tolerance of ±5%

3D printers

5050\3528\3014 RGB color Led Strip

Its DPST ON-OFF Switch

it is very important to remember that a Zener diode should always be used along with a Zener resistor