ER-Collet with seal for IC ER32 | 470EA | < 15µm | Ø 16Application: Collets sealed with seal for IC DIN 6499 B (ISO 15488 B) ER system Note: Only nominal size d can be clamped with sealing plug for internal cooling (applicable up to 21 bar) In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet.

- Instruction manual

In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

PSK = PSK 50

Positionier- und Halte-Pin

Internal measurement jaws are rounded to provide accurate measurement of internal diameters

Through hole for internal cooling provided

Left - right - forehead - overhead

T-nuts 18 mm

tool steel

Hydraulic or manual clamping

10mm for 300mm/12" range

Carbide surfaces