1984-1989 Corvette Instrument Panel Wiring Harness Female Connectors KitReplace Damaged Wiring Harness Connectors or make a test cable! This is a factory Wiring Harness connector set. It includes both large and small plastic connectors, as well as the top and bottom wiring lock combs for each connector. Update: As of 3 29 2020, we now include 15 crimp terminals with the connector set more than enough to make your own bench test cable! Note: There are 41 active pins on the Digital Cluster's 56 pin connector. If you need

3 mounting clips

resulting in a flashing approximately every 0

The control unit operation is intermittent or locked up

1 - Bench Test Power Cable with factory connectors

So we built in a mode to report the temperature and voltage

- Other analog gauges exhibit the same behavior

Note:  This kit inverts the image on your factory LCD

2 - Diodes for Control Module Rebuild

This kit provides the replacement bulbs commonly needed for this panel

You have replaced the internal board connector set and photocell

Protection diodes and communications transistors can be damaged by reverse or 24V jump starts

If you drive a lot at night and need the cluster to dim completely