2 Pin PCB Terminal Block 7.5mm Pitch 20A Rating ZB429Terminal blocks (also known as screw terminals) are electrical connectors that allow you to connect wires in the same circuit without cutting or splicing them. Screw with 2 pins. The Terminal Block is a multifunctional and small terminal block. It's used to connect wires to the circuit board. The terminal block's small size allows it to connect two conductors on a PCB where space is at a premium. The wires are held in place by screws on this terminal

Shock Resistance: 270K/330K

CTR > 44% at IF = 10 mA

Colour Grey & White

5k ohm (152) Brand Resistor Chip size 0805 Tolerance 5% Power 1/8W Temperature Range -55°C to +125°C Mounting Type Surface mount No

User-definable

and prevents interference as compared to other cables

Electrostatic discharge and spike noise suppression

which drives ten separate comparators

32 general purpose working registers

Low Current Consumption

Wires ranging from 26 to 18 AWG can be screwed into this ZB003 2 Pin PCB Mount Screw terminal block

Similar to the HIP4081