10 Inch Rack mount for Minisforum MS-01/MS-A2 WorkStation + Keystones3D Printed 2RU rack mount for Minisforum MS 01 or MS A2 Workstation Mini PC! Now in a design to suit 10 Inch Racks! The MS 01 or MS A2 slides into the frame from the rear and is securely held in place with a rear bracket. Also incorporates 4x Keystone sockets so you can route ports around to the Faceplate. Keystone Jacks are NOT included. This listing is just for the Mount, other photos showing Blanks etc are just for example. Does not include Rack

NOTE: You will need to pair this with another ModMount item (Like a Blanking Plate or another MicroPC Mount

It has enough perimeters on the print that it is solid and feels capable of holding the weight of two Mac Minis

This mount also incorporates a Keystone Socket so you can use a Keystone Jack and Fly lead (Optional) to connect your Cable Modem from the front panel

other photos showing devices etc are just for example

3D Printed 1RU rack mount for Protectli FW4B / FW4C device

3D Printed 1U rack mount for the Huawei MT992 VDSL/G

3D Printed 1RU rack mount for the 2x Apple TV (HD & 4K Models) Devices

The device slides into the frame from the back after removing the back plate and there are 4 Keystone sockets that can be used to route cabling around to the front plate (Keystone Jacks and Fly leads not included)

I highly recommend this seller

Your NUC's will slide into the unit from the front and there are holes on the bottom that line up with the mounting holes if you want to fasten the NUCs to the mount

3D Printed rack mount that lets you mount your Unifi Enterprise 8 POE Switch and a Flex Mini Switch into only 1 RU in a standard 19 Inch Rack

you can also secure the sleds with a screw if required