Test conditions for machining centres - Geometric tests for machines with horizontal spindle (horizontal Z-axis)1 Scope This part of ISO 10791 specifies, with reference to ISO 230 1, the geometric tests for machining centres (or other numerically controlled machines, where applicable) with horizontal spindle (i. e. horizontal Z axis). This part of ISO 10791 applies to machining centres having three numerically controlled linear axes (X axis up to 5 000 mm length, Y axis up to 3 200 mm length, and Z axis up to 2 000 mm length), but refers also to supplementary

— creep curve to back calculate rheological parameters

This part of IEC 61158 provides common elements for basic time-critical messaging communications between devices in an automation environment

This part of ISO 10893 can also be applicable to the testing of circular hollow sections

Table 2 regarding the shock absorption has been modified regarding Type 11

BS EN 15471 on Determination of dissolved residues - High-temperature gravimetric method is useful for:

Safety assessment services

Why should you use BS EN 29048 - Extrudability of sealants

Excluded from the scope of this document are:

What is BS IEC 60568 - In-core instrumentation in power reactors about

and to all the occupants of those environments who can be considered as providing valid responses to an environmental survey

or that are identified by “ISO 14343-B”

For filler plugs and protective covers