Methods for the calibration of vibration and shock transducers - Primary shock calibration using laser interferometry1 Scope This part of ISO 16063 specifies the instrumentation and procedure to be used for primary shock calibration of rectilinear accelerometers, using laser interferometry to sense the time dependent displacement during the shock. The method is applicable in a shock pulse duration range 0,05 ms to 10 ms and a range of peak values of 102 m s2 to 105 m s2 (pulse duration dependent). The method allows the shock sensitivity to be obtained.

BS EN 12390‑10 establishes a procedure where a standardized climate-controlled chamber is used and where specimens are placed on a natural exposure site protected from direct rainfall

BS EN 2591-7301 on test methods for temperature endurance of couplers is relevant to:

screws bolts and nuts with long working life and no manufacturing defects

then at 44 °C

a test has been introduced to check that the variation of light output over time is within an acceptable limit

PD IEC TR 62977‑2‑4 is a Technical Report that provides a comprehensive overview of application scenarios for transparent displays of the two major display technologies (liquid crystal (LC) and organic light-emitting diode (OLED) displays) and introduces the observation and illumination aspects that are taken into account for the establishment of appropriate measurement methods

The importance of daylight is taken into account

Prescriptive guidance on methods and applications is not possible

Wall thickness allowance

emissions during product manufacturing and packaging are not in scope of this document

- with gradual change of temperature

With coarse pitch thread M1