Plastics piping systems. Multilayer M (metal) pipes. Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone1 Scope This Technical Report specifies a method for testing the strength of the weld line in the metal layer and the adhesion between the different layers of multilayer M pipes by the use of a cone. NOTE 1 Acceptance of any inner layer made from a specific grade of material is subject to the relevant product standard or system standard and the requirements detailed in that standard. NOTE 2 The test can be used as a product verification test during

as defined in Annex A of IEC 61753‑1

Verification procedures

councils and  building control officers

— closed and adjustable flangeless housings for series 3 sleeve type linear ball bearings

3 Pallets with superstructure

The standard has been amended to improve clarity in response to feedback from users

BS 6180 applies to temporary and permanent barriers designed to protect people from hazards

liquid chilling packages with seasonal change with the given test

ranging from garden hose couplings to aerospace or oil and gas duties

indicating firstly which drycleaning solvents are suitable and secondly the degree of re-oiling that will be necessary

NOTE: This British Standard does not apply to lone worker response services

It specifies requirements for quality