Specification for Chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)1 Scope This British Standard specifies characteristics of a chromium nickel copper molybdenum corrosion resisting steel supplied in the following forms, and as parts, for general aerospace use: a) forging stock and billets and bars for subsequent working: softened, designation S145A; b) forgings: solution treated, designation S145C; c) forgings: solution treated and precipitated, designation S145G; d) black bar for machining: solution treated,

with or without a jointing profile

Either machine may be used during the fibre-drawing process (online for coated fibre only)

Revised and simplified recommendations for bathrooms and WCs

See IEC 60534-8-3

Tables include:

If you are a manufacturer of resistance-welding equipment

i) retrieval of objects in a distributed environment by location and constraints

when fitted into an appropriately prepared hole

Why should you use BS IEC 60747-14-1 - Semiconductor sensors

BS EN 61260-1 is useful as it describes the conformance to a specification that is established when measured deviations from design goals do not exceed the corresponding acceptance limits and the uncertainty of measurement does not exceed the corresponding maximum-permitted uncertainty of measurement for a coverage probability of 95%

BS EN 12094-2 applies to devices which may be triggered by:

The selection of the method to be applied is based on the product matrix and the required sensitivity