Milling arbors for screw-in cutters HSK 63 - M10 - 126 - LB100Application: For mounting screw in cutters with thread. All holders are made of forged steel Specific, low warpage hardened Surface hardened HRC 58~60 Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080 Surface roughness Ra < 0,4 m Tensile strength in the core of min. 800 N mm after DIN All functional surfaces fine machined

5 with h4-tolerance and Ø 6 – Ø 32 with h6-tolerance1

Hardened and grinded all around

In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

ADJRGA = Length adjustment range

For sealing the spindle of the turret

the coolant tube can be moved only to a minimum degree according to DIN (±1°)

For mounting straight-shank tools acc

To use for high speed cutting and high precision milling

Minimal length compensation on compression and expansion balances very small pitch differences between synchro spindle and tap

Hinged mounting device for toolholders

With internal cooling

Adaptive interface machine direction (ADINTMS): BMT non-driven turret interface -size BT65A