Jeep Grand Cherokee ZJ 93-98 Steering Knuckle to Wheel Bearing Hub Bolts 10.9Upgrade your junk OEM hub bolts with these 10. 9 Class (metric equivalent to Grade 8) hardened yellow zinc plated hex flange bolts. These bolt the front wheel hubs bearings to the steering knuckles. These fit better than the tapered factory bolts which were designed to reduce cost. They have far better corrosion protection over black oxide and have a larger hex head which is less likely to cause you problems the next time you need to remove them.

Replaces Mopar J4007467 and 6036060AA

Replacement for Mopar 6036415AA or J0181613

Jeep Wrangler TJ 97-06

NOTE: These are for the rear springs and shackles on CJ's but can also be used on the front if you converted to YJ front springs

1965-1981 Oldsmobile Cutlass

Note about the front lower axle side bolts: These bolts cannot be used for the front lower axle side on TJ's

***Includes 8 screws

Does not require any drilling or modifications

in most cases the nuts will not be needed

7 - Black Grade 5 hex bolts with attached washer to replace Mopar 6512587AA

Replaces Mopar J4007530

Front upper control arm bolts for 2007-2011 Dodge Nitro