50621-0168 // Micro Drill 12Xd

Suitable for tool holders with polygon shank (PSC/PSK) ISO 26623-1

For machining centres without synchronous spindle

- reading 0

Measuring contact points are designed to allow measurements near to the bottom of blind holes

self-clamping

Battery :1

Ausführung:

- Checking and setting the rotation angle position of machine spindles (M19 function - spindle stop in defi ned end position)

Only nominal size d can be clamped with sealing plug for internal cooling (applicable up to 21 bar) In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

Coolant nozzles lockable

Hydraulic or manual clamping

DCONWS = 6 to 18 with two coolant channels