Swivel base for machine vice ATW-40 / ATD-460Construction: Bearing edge ground, 360 graduations for angular adjustment. Delivery: With securing screws and Tee nuts.

5-30mm and 25-50mm range are supplied with setting rings

The steel body is hardened and grinded

Improves chip evacuation and decreases the risk for chip jamming

- Bed height H: 0

Cone and flange hardened and grinded

d = 40/d = 60: For large diameter face mill cutters with four additional threaded holes according to DIN 2079

Chrome vanadium steel main body

- Tightness of the screw connection tested up to 80 bar

clamping depth l2 = max

The insert is clicked into our grid system with

A possible increase of axial force during the tapping process is reduced to a minimum

For horizontal and vertical clamping of round and flat workpieces