Alarm systems. Social alarm systems - IP Communications Protocol1 Scope This Technical Specification specifies a protocol for point to point transmission of alarms, faults, control signals and communications monitoring, between a Local Unit and Controller and an Alarm Receiving Centre using the Internet protocol (IP). The protocol is intended for use over any network that supports the transmission of IP data with sufficient quality of service to support VoIP or a separate voice channel. The Alarm Protocol is

BS EN 16354 on the Specification

that are put together to form the common message sets used in exchanging information in an After Theft System for Vehicle Recovery (ATSVR)

Table 1 — Plant treatment agents to which this International Standard applies

This results from an in-depth review of the particular product design and performance in test(s) by a recognized authority

Pallets are important for warehousing and transporting equipment and make goods easier to transport

Class K : − 65 °C to 200 °C

if a pigtail is to be terminated with an optical connector

What is BS 6079 – Guidance for project management about

This European Standard specifies the method of test for determining the fire resistance of lift landing doors which may be exposed to a fire from the landing side

silts and sands

Note: Other test methods may be used if proven to be equivalent

Note2: does not apply in the case of examination for microbiological defects