Hose Joiner - 70mm - 500mm LengthEssential to racecar and kitcar builders, and those installing their own intercooler conversions Straight 50cm metre lengths of aluminium alloy tube in a range of popular sizes The tube is cut to 0. 5 metre length, ends swaged, but otherwise in its "raw" state. Not polished or swaged All tube is 16 gauge, equivalent to 1. 5mm wall thickness. Grade is HE9 Commonly used for: Boost pipe systems for aftermarket intercooler installations Coolant pipe

Forge Motorsport Charge Cooler Radiator for the Audi RS6 C7 and Audi RS7

Please note: It is very important to fit this hose following the process described in the fitting guide

4x M6 washers

With FMSS9 being an adjustable kit

Fiat Ritmo (1978 - 1988) 35

With owners pushing high torque figures and running plenty of boost through engine software re-calibration the OEM intercooler end tanks can suffer from fatigue very quickly

This actuator is designed for the Ford Sierra Cosworth (two wheel drive version) or the Ford Escort RS turbo

Not only that the internal spring can be changed for either a stronger or weaker version depending on how much boost pressure you are running

but PLEASE REMEMBER this was specific to the car we had in for testing

PFF19-1531 Front Wishbone Front Bush

This in-turn when compared to the weight of the standard OEM intercooler and crash bar

If you have a later K24 Turbo models (2004/2005/2006 and 2007) with 6 speed manual or automatic gearbox