Water quality - Physical, chemical and biochemical methods - Determination of cobalt, nickel, copper, zinc, cadmium and lead: flame atomic absorption spectrometric methods1 Scope This International Standard specifies three methods for the determination of cobalt, nickel, copper, zinc, cadmium and lead in water by flame atomic absorption spectrometry: Section 1: method A, for direct determination by flame atomic absorption spectrometry; Section 2: method B, for determination by flame atomic absorption spectrometry after chelation (APDC) and extraction (MIBK); Section 3: method C, for determination by flame atomic

FDDI-II networks consist of FDDI-IIstations

Hermeticity test is useful in identifying the leakage between PDMS and PDMS chip or PDMS and glass chip

or made grease resistant by a plastic extrusion coating

flexible fuel lines

commercial and other non-power plant applications

It is intended for products that contain alkaline pigments or other alkaline material

risk management can be an integral part of a quality management system

5 Position of the impact point and impact angle

reduced bore and double reduced bore seat openings suitable for petroleum

these methods do not require recall on the part of the user and will be excluded from this part of the standard and will be dealt with in other parts

with compliance and obedience of BS EN 60601‑2‑40

BS EN 3388 is applicable to externally threaded fasteners when referenced on the product standard or drawing