Mechanical vibration and shock. Mechanical impedance of the human hand-arm system at the driving point1 Scope This International Standard specifies the mechanical impedance of the human male hand arm system at the driving point. Values of the impedance, expressed as modulus and phase, are provided for three orthogonal, translatory directions of excitation that correspond to the xh , yh and zh axes of the basicentric coordinate system. NOTE 1 The basicentric coordinate system is defined in ISO 5349 1[2] and ISO 8727.[5] The xh , yh and zh components of

How to transfer and share data required for indoor navigation between a roadside ITS station and a central ITS station

for example ISO 261

— demands to venting device on diverter

— medium pressure

and cone factor

Additional safety requirements for specific pieces of playground equipment are specified in subsequent parts of this standard

produce lower levels of smoke and corrosive products under exposure to fire compared with cables conforming to BS 5467

NOTE Industrial processes can include manufacturing

BS EN 4057-302 on flammability characteristics of cable ties is useful for:

and 4 is not classified as a forced movement equipment

b) to establish the performance limits of the system

The accuracy is provided by repeatability standard deviation and reproducibility standard deviation