Keyswitch 4 Position DP3T 606 Key S2654Panel hole 19mm, length 27. 5mm from rear of front shroud, 33. 6mm overall depth, 61mm depth with key inserted, including terminals. Overall diameter 22mm. Rated 2A @ 250V AC. Note: Key removable in centre position. Non spring return (ie. Alternate action). Supplied with two keys Electrical Contact Rating: 4A 125VAC 28VDC, 2A 250VAC Contact Resistance: Below 10 million Insulation Resistance: 1 Billion Min. Dielectric Strength: 1000V RMS Min. sea level

USING R0862 (327)

600 V AC ± (2

Suitable for pre moulded end cables going to LCD screens

Reel of 300

input coupling: DC

10mV/Amp (20KHz at ±3dB)

Voltage Rating: 250V

Ingress protection: IP65

they can be programmed to operate on a wide variety of days

Upper and lower temperature limits can be set for each input and if/when these limits are reached

This provides far greater low current resolution than most traditional clamp meters which are typically designed for electricians rather than electronics use

office equipment