Brass Leash PlugItem: Brass Leash Plug A smart investment in your surfboard, this serves as the anchor point for your leash. Stuart designed this Brass Leash plug not only for practical purposes but for an easy install into hollow boards; gluing in with very little clean up after. The top flange is only 1 mm thick so with the glass and resin on the deck it easily becomes flush when it is sanded flush and buffed. Its robust build ensures it can handle the demands of

9 1/2" x 6" Base

Check out our Gould DIY kits to make at home

About 8'2" Thorpe Collectors Edition

Unsure which Kit to purchase

You can build your own custom board either 9'6" or 10' x 22 1/4" x 2 3/4"

Weight: Your board should end up at under 1kg per foot depending on your external finish

You do not need a vent if you have a bung or Air Vent Screw and every board needs a bung

Across our 8 different surfboard styles

This is a great way to start your woodworking

A 10” centre fin box will offer stability and control

Nose concave - Middle flat - Tail Rolled V

Internal frame 6 mm plywood