2U Rack Mount for 3x Minisforum UN 1245 / 1265 Mini PCs3D Printed 2RU rack mount for 3x Minisforum UN1245 (or UN1265) Mini PCs Your PCs will slide into the unit from the front and there are holes on the bottom that line up with the mounting holes if you want to fasten them to the mount. This listing is just for the Rack Mount, other photos showing Blanks etc are just for example. Does not include Rack Screws, Cage Nuts, or Network equipment. Do you need to have text or a logo printed on the front? Custom

NOTE: You will need to pair this with another ModMount item (Like a pair of Blanking Plates or another Wiim Amp Mount

) to make a full 2RU Width

Comes in versions suitable for both Raspberry Pi 4 or 5's

3D Printed 2RU rack mount for the PiKVM v4 Plus

Keystone Jacks or Network equipment

3D Printed 1RU rack mount for the Philips Hue Bridge (V2) and Netgear Nighthawk M1 (also M2) mobile router

There are multiple options for the shelves as well as a Left and Right Orientation depending on how you want to organise your rack

However for reference

the Cable modem slides into the frame by removing the backplate

Original design by jondoe130 on Thingiverse

This mount also incorporates a Keystone Socket so that you can use an Ethernet Jack and 25cm patch cable (Optional Extra) to connect to your Cloud Key from the front panel

3D Printed rack mount that lets you mount your Unifi Professional or Enterprise 8 POE Switch AND your Home Assistant Yellow appliance into 1 RU