40 2-NO30-10PK - RENOLD 1/2 Inch Pitch Premier Standard LinkDouble cranked links are available for most sizes and types of chain. The unit consists of an inner link (No. 4), with cranked links retained permanently in position by a riveted bearing pin. Screw operated extractors break chain by forcing the Renold end softened bearing pins out of the outer link plates. For other brands of chain, the rivet swell must first be ground away.

22 10 k j c3 Wide Bore Size - 50mm Tapered Bore (1:12 on Diameter) Pressed Steel Cage Radial Internal Clearance Greater than Normal

S 60 08 2RSR Stainless Steel Extra Light Series 40mm - Bore Size Rubber Seals on Both Sides of Bearing Normal Radial Internal Clearance

Non-Separable 65mm - Bore Size Optimized Internal Design Roller Centred

No Flange on Outer Ring Medium 20mm - Bore Size Standard Design Steel Cage Normal Internal Clearance

70 38 CTR DU M P3 Series - Extra Light Bore Size - 190mm 15 Degree Contact Angle Duplex Universal Medium Preload Precision Rating

This NUP236M bearing is a single row cylindrical roller bearing

10 25 25 LSG Spherical Outside Diameter Basic Group 25 mm Shaft Diameter Re-greaseable

This 3305A 2ZTN9/MT33 bearing is a metric double row angular contact bearing with a metal shield on both sides of the bearing filled with lithium grease

This 5202-2RSTNC3 bearing is a metric double row angular contact bearing with a polyamide cage

This MSF35HLT bearing is a Cast Iron Flange Bearing Unit with a high/low temperature bearing insert

1/8TF bearing is a Y-Bearing Plummer Block Unit with a bearing insert with grub screws

No Flange on Inner Ring Heavy 40mm - Bore Size Standard Design Steel Cage Normal Internal Clearance