99525 - SKF Speedi-Sleeve - Max. Shaft Diameter 133.45mmWhen wear and damage occur on a shaft, SKF Speedi Sleeves are the solution. In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary, and, over time, will allow contaminants to enter the component and cause further damage to both the shaft and the component. Simply replacing the seal will not repair the damage to the shaft and

The Bearing's dimensions are 7X14X12mm

The NJ2206ECP/C4 SKF bearing is designed to handle high-speed operations while maintaining low noise and vibration levels

This KLNJ5 8 2RS R&M bearing is a Sealed Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 5/8x1

This 1203J bearing is a double row

providing stable performance even in extreme conditions

Different Sizes Available

BTW85 CTN9/SP bearings offer a high-speed design and are intended for mounting in combination with NN30 K or N10 K Cylindrical Roller Bearings

This 6208 M FAG bearing is a Open Type Deep Groove Radial Ball Bearing with a Machined Brass cage

This 2MM217WICRDUM bearing is a Super Precision Angular Contact Bearing with a 15° Contact Angle and a Phenolic Cage

M 84548 Imperial Series Medium Cone Reference With an Outer Ring Angle Of 36° to 44° 59‚' 59

NU 3 26 E TVP2 C3 Two Flanges on Outer Ring and No Flanges on Inner Ring Medium Series 130mm - Bore Size Increased Capacity Design Solid Window Cage Made From Glass Fibre Reinforced Polyamide PA66 Radial Internal Clearance Larger Than Normal

NU 23 15 E TVP2 C3 Two Flanges on Outer Ring and No Flanges on Inner Ring Medium