Sonos PORT 2RU Rack Mount (Modular)3D Printed 2RU rack mount for the Sonos Port. This is part of our ModMount Range, so you can mix and match your parts! NOTE: You will need to pair this with another ModMount item (Like a 2 Blanking Plate, or 2 other 1RU ModMount mounts) to make a full 2RU Width. The Sonos Port slides into the frame from the front with cables accessible from the rear (Or you can turn it around if you prefer the cables facing forward). This listing is just for the Rack

The Devices slide into the frame from the front (Removing the rubber feet from the USG for a firm fit)

The screws to fasten the RPI to the trays are NOT included

The Mini PC's slide into the mount from the front and all ports are accessible from the rear

EliteDesk Mini 800 G1 - G8

This mount also incorporates as Keystone Socket so you can use a Keystone Jack and Fly lead (Optional Extra) to connect to the LAN port to the front panel

remove the 4 screws holding each Back in place

3D Printed rack mount that lets you mount up to 5 2

The PC slides into the frame from the front and the cables are accessible from both the front and rear

The Cable modem slides into the frame by removing the backplate

) to make a full 1RU Width

) 8 POE Switch into 1 RU

The Flex-XG slides into the frame from the back after removing the back plate