Non-destructive testing of steel tubes - Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections1 Scope This part of ISO 10893 specifies requirements for automated eddy current testing of seamless and welded tubes with the exception of submerged arc welded (SAW) tubes, for the detection of imperfections according to the different acceptance levels as shown in Tables 1 and 2. It is applicable to the inspection of tubes with an outside diameter greater than or equal to 4 mm. This part of ISO 10893 can also be applicable to the testing of hollow

This method is applicable to cigarettes with total particulate matter (TPM) yields between 20 mg/cigarette and 45 mg/cigarette

fillers/reinforcement content and type

What is BS EN 16602-70-71- Materials

IMPORTANT The fire performance is tested using acetone and isopropanol as the fuel

such as boards

tension) of dynamic mechanical analysis can be applied

depressurisation vapour connector is a connection enabling the equalisation of pressure between the tank wagon and the vapour recovery system of the filling station to minimise volatile organic compound emissions

a standard test solution is specified which

providing the unit with a substantially longer working life

c) decorative fuel effect gas appliances

The description of the scraper has been modified

The requirements for non-metallic braid hose assemblies are given in ISO 8829-2