Bi750-48 | Bi750 Near-IR Interference Bandpass FilterThe MidOpt Bi750 48 can be used with 750 nm IR illumination to highlight dyes used in labeling, packaging, and manufacturing. These markings often do not stand out when viewed under visible, white, or colored light. Use of a Bi750 placed filter over the camera sensor or the cameras objective lens can eliminate interfering visible and longer wavelength near IR light, greatly improving contrast detection. All MidOpt filters can also be purchased

RL208M-16062524 Specifications:

APG 35C-MQ

22× Minimum Object Distance with 1mm Ring 82 mm Minimum Object Distance with 5mm Ring 45 mm Minimum Object Distance with 10mm Ring 25 mm Magnification with 1mm Ring 0

Advanced Illumination DL15106-625I3S Downloads:

Product Configuration Details + Collimated Collimated Wavelength 530nm Green Diffused Not Diffused Polarized Not Polarized Lens Angle 14 Degree

Advanced Illumination BL31306-47024 Downloads:

Analog Cable with 6 Pin Female Plug HR10A-7P-6S* connector with a connector orientation of Straight to 25 meter 28 AWG x 6C (I/O) cable to Flying Lead for End "B" ONLY connector

Base Part Number Lens Type Diffuser Type Cable Type Driver Type HLL134

8 x 80 x 80 mm Front Diameter 80 mm Weight 1046 Grams Filter Thread No Filter Threads Operating Temperature Range 0 to 40°C Storage Temperature Range 0 to 50°C Operating Relative Humidity (%) Not Specified Installation Location Not Specified Temperature Sensor No Line 4k-7µm 71

Material is POM-C Acetal

SL-S050075W-WHI Specifications:

1 W Max Overcurrent Strobe Current 460 mA Max Overcurrent Strobe Latency 10 us Max Overcurrent Strobe Frequency 4000 Hz Max Overcurrent Strobe Duty Cycle 100 % Min Overcurrent Strobe Duration 30 ms Max Overcurrent Strobe Input Power 11 W Max Duty Cycle 100 % PNP Trigger Voltage 4-24 VDC V PNP Trigger Current 20 mA NPN Trigger Voltage < 1 VDC V NPN Trigger Current 15 mA